Siemens SIMATIC NET SCP Series, Руководство по эксплуатации

Страница: 21 / 58

Notes on SCALANCE XR-500
Note
Fixed slots of the SCALANCE XR528-6M and XR552-12M
The SFP+ transceivers are not suitable for media modules. The devices
SCALANCE XR528-6M and XR552-12M product group have four fixed slots for SFP+.
It is, however, possible to operate SFP transceivers in the fixed SFP+ slots of the device. Note
that the SFP+ slots only support SFP transceivers with a transmission rate of 1000 Mbps.
Notes on SCALANCE W:
Note
With a SCALANCE W786-2, do not plug or pull an SFP transceiver during operation!
If you have questions on the use of SIMATIC NET products, please contact your Siemens sales
partner.
4.3 Using a pluggable transceiver (SFP/SFP+)
Figure 4-1 Plugging in a transceiver
Follow the steps below to insert a pluggable transceiver:
1. Remove the sealing plug of the pluggable transceiver.
2. Close the clip of the pluggable transceiver.
3. Insert the pluggable transceiver in the pluggable transceiver slot until you hear it engage,
see figure.
The pluggable transceiver is then firmly secured.
4. Insert the connecting cable into the pluggable transceiver until you hear it engage.
The connecting cable is then firmly secured.
Assembling
4.3 Using a pluggable transceiver (SFP/SFP+)
Transceiver SFP/SFP+/SCP/STP
Operating Instructions, 10/2019, A5E02630804-13
21