Siemens SIMATIC NET SCALANCE XM-400 Скачать руководство пользователя страница 8

Страница: 8 / 88

Introduction

SCALANCE XM-400

Operating Instructions, 09/2018, C79000-G8976-C306-08

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be

connected to an enterprise network or the internet if and to the extent such a connection is

necessary and only when appropriate security measures (e.g. firewalls and/or network

segmentation) are in place.
For additional information on industrial security measures that may be implemented, please

visit

https://www.siemens.com/industrialsecurity (

https://www.siemens.com/industrialsecurity

)

Siemens’ products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers’ exposure

to cyber threats.
To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed under

https://www.siemens.com/industrialsecurity (

https://www.siemens.com/industrialsecurity

)

Catalogs

You will find the article numbers for the Siemens products of relevance here in the following

catalogs:

●

SIMATIC NET Industrial Communication / Industrial Identification, catalog IK PI

●

SIMATIC Products for Totally Integrated Automation and Micro Automation, catalog

ST 70

●

Industry Mall - catalog and ordering system for automation and drive technology, Online

catalog

(

https://mall.industry.siemens.com/goos/WelcomePage.aspx?regionUrl=/en&language=e

)

You can request the catalogs and additional information from your Siemens representative.

Device defective

If a fault develops, please send the device to your SIEMENS service center for repair.

Repairs on-site are not possible.

Содержание SIMATIC NET SCALANCE XM-400

























































































Результаты поиска

Содержание SIMATIC NET SCALANCE XM-400

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE XM-400

Бренды по названию

Популярные бренды

Siemens SIMATIC NET SCALANCE XM-400, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC NET SCALANCE XM-400

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE XM-400

Бренды по названию

Популярные бренды