Siemens SIMATIC NET SCALANCE XM-400 Скачать руководство пользователя страница 40 | Manualshive

Страница: 40 / 88

background image

Description of the device

4.8 C-PLUG/KEY-PLUG

SCALANCE XM-400

40

Operating Instructions, 09/2018, C79000-G8976-C306-08

Operation with C-PLUG/KEY-PLUG
The configuration stored on the C-PLUG/KEY-PLUG is displayed via the user interfaces.
If changes are made to the configuration, the device stores the configuration directly on the

C-PLUG/KEY-PLUG, if this is in the "ACCEPTED" status. The internal memory is neither

read nor written.

Response to errors

Inserting a C-PLUG/KEY-PLUG that does not contain the configuration of a compatible

device type, accidentally removing the C-PLUG/KEY-PLUG or general malfunctions of the C-

PLUG/KEY-PLUG are signaled by the diagnostics mechanisms of the device (LEDs, Web-

based management (WBM), SNMP, Command Line Interface (CLI) and PROFINET

diagnostics).
The user then has the choice of either removing the C-PLUG/KEY-PLUG again or selecting

the option to reformat the C-PLUG/KEY-PLUG.

4.8.2

Replacing the C-PLUG/KEY-PLUG

Position of the C-PLUG/KEY-PLUG

NOTICE
Do not remove or insert a C-PLUG/KEY-PLUG during operation
A C-PLUG/KEY-PLUG may only be removed or inserted when the device is turned off.
The device checks whether or not a C-PLUG/KEY-PLUG is inserted at one second

intervals. If it is detected that the C-PLUG/KEY-PLUG was removed, there is a restart.
If a KEY-PLUG was inserted in the device, the device changes to a defined error state

following the restart.

The C-PLUG/KEY-PLUG slot is on the top of the device housing.

«
...
38
39
40
41
42
...
»

Содержание SIMATIC NET SCALANCE XM-400

























































































Отзывы:

Нет отзывов

Похожие инструкции для SIMATIC NET SCALANCE XM-400

Бренд: Ubisys Страницы: 40

Бренд: Maipu Страницы: 21

Бренд: Maico Страницы: 56

Бренд: DANLERS Страницы: 2

NAMUR BES G06MD-GNX10B-EV02-EEX

Бренд: Balluff Страницы: 56

Бренд: GHIELMETTI Страницы: 12

Бренд: Enttec Страницы: 22

Бренд: Cabletron Systems Страницы: 170

PFS4226-24ET-240

Бренд: Dahua Страницы: 3

Бренд: Quartz Страницы: 43

Бренд: Racal Instruments Страницы: 33

Бренд: FS Страницы: 43

Бренд: CIECO Страницы: 17

Бренд: J-Tech Digital Страницы: 12

3 x 4 SWITCH PLUS

Бренд: W2IIHY Страницы: 28

CheetaHub Classic-2041

Бренд: Accton Technology Страницы: 7

Summit X450-G2-24t-GE4

Бренд: Extreme Networks Страницы: 2

ControlZAPP CZ CEFL 10VDC

Бренд: DANLERS Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды