Siemens SIMATIC NET SCALANCE XB-200 Series Скачать руководство пользователя страница 37

Страница: 37 / 78

6.2.2

Optical

NOTICE
Failure of the data traffic due to contamination of optical plug-in connections
Optical sockets and plugs are sensitive to contamination of the end face. Contamination can

lead to the failure of the optical transmission network. Take the following precautions to avoid

functional impairments:
● Clean the end face of field-assembled connectors carefully before connecting. No residues

of processing may remain on the connector.

● Only remove the dust caps of optical transceivers and pre-configured cables shortly before

connecting the cables.

● Close unused optical sockets and plugs as well as pluggable transceivers and slots with

the supplied protective caps.

SC connectors

The attachment to Industrial Ethernet uses SC connector

technology (Subscriber Connector).

ST/BFOC connectors

The attachment to Industrial Ethernet uses ST/BFOC con‐

nector technology (Straight Tip/Bayonet Fiber Optic Connec‐

tor).

Connecting up

6.2 Industrial Ethernet

SCALANCE XB-200

Operating Instructions, 03/2020, C79000-G8976-C359-09

Содержание SIMATIC NET SCALANCE XB-200 Series















































































Результаты поиска

Содержание SIMATIC NET SCALANCE XB-200 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE XB-200 Series

Бренды по названию

Популярные бренды

Siemens SIMATIC NET SCALANCE XB-200 Series, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC NET SCALANCE XB-200 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE XB-200 Series

Бренды по названию

Популярные бренды