Siemens SIMATIC NET SCALANCE XB-200 Series Скачать руководство пользователя страница 8

Страница: 8 / 78

Device defective

If a fault develops, send the device to your SIEMENS representative for repair. Repairs on-site

are not possible.

Decommissioning

Shut down the device properly to prevent unauthorized persons from accessing confidential

data in the device memory.
To do this, restore the factory settings on the device.

Recycling and disposal

The products are low in pollutants, can be recycled and meet the requirements of the WEEE

directive 2012/19/EU for the disposal of electrical and electronic equipment.
Do not dispose of the products at public disposal sites.
For environmentally friendly recycling and the disposal of your old device contact a certified

disposal company for electronic scrap or your Siemens contact (Product return (

https://

support.industry.siemens.com/cs/ww/en/view/109479891

)).

Note the different national regulations.

Trademarks

The following and possibly other names not identified by the registered trademark sign

are

registered trademarks of Siemens AG:
SIMATIC NET, SCALANCE, C-PLUG, OLM

Introduction

SCALANCE XB-200

Operating Instructions, 03/2020, C79000-G8976-C359-09

Содержание SIMATIC NET SCALANCE XB-200 Series















































































Результаты поиска

Содержание SIMATIC NET SCALANCE XB-200 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE XB-200 Series

Бренды по названию

Популярные бренды

Siemens SIMATIC NET SCALANCE XB-200 Series, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC NET SCALANCE XB-200 Series

Отзывы:

Похожие инструкции для SIMATIC NET SCALANCE XB-200 Series

Бренды по названию

Популярные бренды