Siemens SIMATIC NET SCALANCE X-000 Series, Руководство по эксплуатации

Страница: 26 / 52

WARNING
Wall mounting outside of the control cabinet or housing does not fulfill the requirements of
the FM approval.
Note
You must not install the device on a wall in hazardous areas.
To mount the device on a wall, you require the following:
● 4 wall plugs, 6 mm in diameter and 30 mm long
● 4 screws 3.5 mm in diameter and 40 mm long
To mount the device on a wall, follow the steps below:
1. Prepare the drill holes for wall mounting. For the precise dimensions, refer to the section
"Dimension drawings (Page 41)".
2. Fit the connectors for the power supply. See also section "Power supply (Page 29)".
3. Insert the terminal block into the sockets on the device.
4. Screw the device to the wall.
Note
The wall mounting must be capable of supporting at least four times the weight of the device.
Mounting
5.5 Wall mounting
SCALANCE X-000
26
Operating Instructions, 12/2018, C79000-G8976-C344-03