Siemens SIMATIC NET SCALANCE M80PB, Начало работы

Страница: 50 / 62

PROFINET connection
3.2 Remote service
Cloud Connector
50
Getting Started, 07/2020, C79000-G8976-C507-03
Requirement
• Service Center
– PC1a
SINEMA RC server is installed and available. You can find additional information on this
in the operating instructions "SINEMA RC Server
( https://support.industry.siemens.com/cs/ww/en/view/109482121 )".
– PC1b
TIA Portal V15 Update 4 is installed on the PC.
Access to this server via Remote Desktop is configured for the service technician.
• Service technician
– The PC has access to the Internet.
– The SINEMA RC client is installed. You can find additional information on this in the
operating instructions "SINEMA RC Client
( https://support.industry.siemens.com/cs/ww/en/view/109482124 )".
• Station
– The device is connected to the Internet
– Firmware version 6.3
– The device is accessible via the PC and you are logged on to the WBM as
"Administrator".
You can find more information on this in the "SCALANCE M-800 Getting Started
( https://support.industry.siemens.com/cs/ww/en/view/78389746 )".
– KEY PLUG for SINEMA RC is available.
– The device is connected to the CPU via P2 (VLAN1).
Steps in configuration
The following steps are required to read out the diagnostic buffer:
1.
Creating a device and user on the SINEMA RC server (Page 50)
2. Enabling SINEMA RC and TIA Portal Cloud Connector on the device (Page 54)
3. Connecting the VPN tunnel to the SINEMA RC server with the SINEMA RC client (Page 55)
4. Enabling the TIA Portal Cloud Connector on the server (Page 57)
5. Connecting via the TIA Portal Cloud Connector (Page 58)
3.2.2 Creating a device and user on the SINEMA RC server
Requirement
• The SINEMA RC is accessible and you are logged on to the WBM with administrator rights.