Siemens SIMATIC NET SCALANCE M80PB, Начало работы

Страница: 22 / 62

PROFIBUS connection
2.2 Remote service
Cloud Connector
22
Getting Started, 07/2020, C79000-G8976-C507-03
② The service technician uses the SINEMA RC client to set up a VPN tunnel to the SINEMA RC
server at the service center. With the configuration setting in the SINEMA Remote Connect
Server (PC1a), the LAN interface is enabled for the service technician. The service technician
uses Remote Desktop to connect his PC (PC2) with the server (PC1b) in the service center.
Service Center
③ Via Remote Desktop, the service technician enables the TIA Portal Cloud Connector (client)
to establish a communication connection with the TIA Cloud Portal Connector (server) of the
SCALANCE M804PB. The communication connection is secured by the SINEMA RC server.
④ Establish the online connection to the TIA Portal or STEP7 via the TIA Portal Cloud
Connector.
When the online connection is established, the service technician can read out the diagnostic
buffer of the CPU.
Settings used
For the configuration example, the devices are given the following IP address settings:
Device Interface IP address
SINEMA RC
server (PC1a)
LAN port 192.168.0.150
255.255.255.0
WAN port 192.168.20.150
255.255.255.0
The WAN IP address via which the SINEMA RC server can be
reached is the WAN IP address of the router in this example,
192.168.203.150.
Default gateway is the LAN IP address of the router
192.168.20.2
Router 1 (R1) LAN port 192.168.20.2
255.255.255.0
WAN port Static IP address assigned by provider, e.g. 192.168.203.150
Service Center
(PC1b)
LAN port
(vlan1)
192.168.0.20
255.255.255.0
Service techni-
cian (PC3)
192.168.5.1
255.255.255.0
Default gateway is the LAN IP address of the router
192.168.5.2
Router 2 LAN port 192.168.5.2
255.255.255.0
WAN port Dynamic IP address from the provider
M840PB LAN port
(vlan1)
192.168.16.84
255.255.255.0
WAN port
(vlan2)
192.168.50.1
255.255.255.0
Default gateway is the LAN IP address of the router
192.168.50.2