Siemens SIMATIC NET SCALANCE M80PB, Начало работы

Страница: 15 / 62

PROFIBUS connection
2.1 Local service
Cloud Connector
Getting Started, 07/2020, C79000-G8976-C507-03
15
The predefined IPv4 rule "Cloud Connector" is enabled for the incoming packets to be
forwarded to the device.
2.1.3 Enabling the TIA Portal Cloud Connector on the PG/PC
Requirement
• The TIA Portal Cloud Connector V1.1 SP4
( https://support.industry.siemens.com/cs/ww/en/view/109764115 ) is installed.
You can find additional information on the TIA Portal Cloud Connector in the
documentation "Working with the TIA Portal Cloud Connector
( https://support.industry.siemens.com/cs/ww/en/view/109747305 )" and "SIMATIC
Instructions on the TIA Portal Cloud Connector
( https://support.industry.siemens.com/cs/ww/en/view/109742490 )".
Activating the TIA Portal Cloud Connector
1. Start the TIA Portal Cloud Connector.
2. In the "General" tab, select the "Remote device" option.
3. Switch to the "Protocol" tab and select the "TCP settings" option.
4. Configure TCP with the following settings:
Target device SCALANCE
User device address IP address of the SCALANCE M804PB
Port 9023
The port must be the same as the port assigned
to the remote device.
5. To store the settings, click the "Apply" button.
6. Switch to the "General" tab.