Siemens SIMATIC NET SCALANCE M80PB, Начало работы

Страница: 31 / 62

PROFIBUS connection
2.2 Remote service
Cloud Connector
Getting Started, 07/2020, C79000-G8976-C507-03
31
2.2.5 Enable the TIA Portal Cloud Connector on the server
Requirement
• The service technician is connected to the server via Remote Desktop
• The TIA Portal Cloud Connector V1.1 SP4
( https://support.industry.siemens.com/cs/ww/en/view/109764115 ) is installed.
You can find additional information on the TIA Portal Cloud Connector in the
documentation "Working with the TIA Portal Cloud Connector
( https://support.industry.siemens.com/cs/ww/en/view/109747305 )" and "SIMATIC
Instructions on the TIA Portal Cloud Connector
( https://support.industry.siemens.com/cs/ww/en/view/109742490 )".
Procedure
1. Start the TIA Portal Cloud Connector.
2. In the "General" tab, select the "Remote device" option.
3. Switch to the "Protocol" tab and select the "TCP settings" option.
4. Configure TCP with the following settings:
Target device SCALANCE
User device address VPN address of the SCALANCE M804PB
The VPN address of the SCALANCE M804PB is displayed on the SINEMA
RC client.
Port 9023
The port must be the same as the port assigned to the remote device.
5. To store the settings, click the "Apply" button.
6. Switch to the "General" tab.
7. Click on the link in the "Cloud Connector Communication" area.
When the connection to the TIA Portal Cloud Connector of the SCALANCE M804PB has
been successfully established, a check mark appears next to the link.
8. Click on the "Enable Communication" button in the "Cloud Connector Communication" area.