Modules
4.3 Installing/Removing Power Supply Modules
Removing a Power Supply Module
To remove a power module, do the following:
1. Loosen the screws that secure the module to the chassis until the module can be
removed.
3
2
1
1
Screws
2
Power Supply
3
Chassis
Figure 4.6
Removing a Power Supply
2. Slide the module out of the chassis.
3. Install a new or blank module to prevent the ingress of dust and dirt.
Installing a Power Supply Module
To install a power module, do the following:
1. If equipped, remove the existing module.
32
RUGGEDCOM MX5000
Installation Manual, 01/2021, C79000-G8976-1059-13
