SIMATIC NET OLM12M
6ZB5530–3AB00–0BA0/01
28
Copyright Siemens AG 1997
8
Hilfe bei Betriebsstörungen
LED–Anzeige
Mögliche Fehlerursache
Meldekontakt
System–LED leuchtet nicht
- Versorgungsspannung ausgefallen
- OLM12M defekt
meldet
System–LED leuchtet rot
- Unterbrechung des Empfangs–LWL zum Partnermo-
dul bei CH2 oder CH3 (zum Lokalisieren des defek-
ten Kanals siehe bei ’CH2, CH3–LED leuchtet nicht’)
- Nichtverwendeter CH2 oder CH3 ist nicht in Be–
triebsart ’Inactive’ geschaltet
meldet
CH1–LED leuchtet nicht
- Unterbrechung einer oder mehrerer Adern der
RS485–Busleitung
- Adern A und B der RS485–Busleitung sind ver-
tauscht angeschlossen
- angeschlossener PROFIBUS–Teilnehmer ist defekt
oder sendet nicht
- PROFIBUS–Teilnehmer ist nicht angeschlossen
oder angeschlossener PROFIBUS–Teilnehmer ist
nicht eingeschaltet
meldet nicht
CH1–LED leuchtet
PROFIBUS–Teilnehmer mel-
den jedoch Busstörungen
- Adern A und B der RS485–Busleitung sind ver-
tauscht angeschlossen
- Kurzschluß an der RS485–Busleitung
- Unterbrechung einer der beiden Adern der
RS485–Busleitung und Ader A und B beim Anschluß
vertauscht
- Fehlende oder falsche Terminierung
meldet nicht
CH2–, CH3–LED leuchtet
nicht
- Sende– und Empfangs–LWL sind vertauscht ange-
schlossen
- Unterbrechung des Empfangs–LWL zum Partnermo-
dul
- kein Partnermodul angeschlossen oder angeschlos-
senes Partnermodul ist nicht eingeschaltet
- angeschlossenes Partnermodul ist defekt (sendet
nicht)
- Kanal ist in Betriebsart ’Inactive’ geschaltet’
meldet
CH2–, CH3–LED leuchtet
PROFIBUS–Teilnehmer mel-
den jedoch Busstörungen
- LWL–Stecker ist lose (Wackelkontakt)
- LWL–Streckenlänge zum Nachbarmodul zu lang
- Unterbrechung des Empfangs–LWL mit Einfall von
Fremdlicht
meldet nicht
Sind alle Anzeigen fehlerfrei und treten dennoch Kommunikationsstörungen auf (z. B. Quittung
bleibt aus, unerwartete Telegramme), sind die bei den PROFIBUS–Teilnehmern eingestellten Über-
wachungszeiten (wie z. B. die Slot Time) zu überprüfen.
Details entnehmen Sie bitte der Beschreibung Ihrer PROFIBUS–Endgeräte.
Bei großen PROFIBUS–Netzen mit vielen Modulen und großen Leitungslängen ist bei der Einstel-
lung der Überwachungszeiten die Verzögerung durch Netzkomponenten und Leitungen (Transmis-
sion Delay) zu berücksichtigen.
Hierzu wird die Übertragungsverzögerungszeit (Transmission Delay Time, TTD ) ermittelt:
Die Übertragungsverzögerungszeit ist die maximale Zeit, die bei der Übertragung eines Tele-
gramms auf dem Übertragungsmedium vom Sender zum Empfänger verstreicht.
Содержание SIMATIC NET OLM12M
Страница 1: ... E ...
Страница 6: ...SIMATIC NET OLM12M 6ZB5530 3AB00 0BA0 01 II Copyright Siemens AG 1997 ...
Страница 44: ...SIMATIC NET OLM12M 6ZB5530 3AB00 0BA0 01 38 Copyright Siemens AG 1997 ...
Страница 45: ... E ...