Siemens SIMATIC IPC647E, Руководство по эксплуатации

Страница: 175 / 200

Hardware description
A.3 Bus board
SIMATIC IPC647E
Operating Instructions, 11/2018, A5E45589180-AA
175
A.3.2 Interrupt assignment of expansion card slots on the bus board
Note
All system resources (hardware addresses, memory allocation, interrupt allocation, DMA
channels) are dynamically assigned by the firmware or operating system depending on the
hardware setup, drivers, inserted expansion cards and connected external devices.
Assignment is performed automatically and is independent of the resources required by the
connected devices and inserted components. Due to this configuration dependency, clear
statements can only be made by determining them in relation to the system in the final
configuration.
Resources may be viewed as follows under Windows:
1.
Press the "Windows® key" and "R" simultaneously.
2. Enter "msinfo32" in the "Open" field.
3. Confirm your entry with "OK".
Applications which place high demands on interrupt performance require a fast interrupt
hardware response time. In order to enable fast hardware response time, the PCI hardware
interrupt may only be allocated to one resource.
Variant 1: 4-slot, 2 x PCI, 2 x PCIe / with piggyback
For details on this bus board version, see "Expansion card slots on the bus board
(Page 173)".
Slot Connector
Type Slot 1
PCI
Slot 4
PCI
Slot 3
PEG
Gen3
8 lane Slot 2
PEG
Gen3
8 lane M.2
PCIe
Gen3
4 lane
Host Device PCH
Port 8
Dev 13 PCH
Port 8
Dev 14 PEG
0:1:0 PEG
0:1:1 PCH
Port 21
Bus
APIC Interrupt Primary A
INT A PIRQ D PIRQ A PIRQ A PIRQ B PIRQ A
INT B PIRQ A PIRQ B PIRQ B PIRQ C PIRQ B
INT C PIRQ B PIRQ C PIRQ C PIRQ D PIRQ C
INT D PIRQ C PIRQ D PIRQ D PIRQ A PIRQ D
B18 Req0 Req1 n.a. n.a. n.a.
A17 Gnt0 Gnt1 n.a. n.a. n.a.
A26 AD29 AD30 n.a. n.a. n.a.