Siemens Simatic IPC647C, Руководство по эксплуатации

Страница: 76 / 246

Expansions and parameter assignment
10.3 Installation and removal of expansion modules
SIMATIC IPC647C
76
Operating Instructions, 12/2010, A5E02669337-02
How to install an expansion module (PCI / PCIe format):
6.
If necessary, fasten the support
bracket to the side of the bus frame
with the proper expansion rivets.
You do not need a tool to do this.
 Remove the support bracket
from the accessories kit.
 Place the support bracket inside
the side of the bus frame and
align the support bracket to the
holes.

Insert the expansion rivets from
the outside through the bus
frame and support bracket and
press down them.
Note:
To ensure stable assembly, you
need this support bracket to install
a low-profile expansion module.
When converting from a low-profile
to a high-profile expansion module,
the support bracket may need to be
removed again.
7.
Take the latching retainer
①
from
the accessories kit.
Note:
You may only use latching
retainers of the same type.
Information about original spare
parts for SIMATIC PCs is available
on the Internet at: After-sales
information system for SIMATIC
PC / PG
(http://www.siemens.de/asis).
Latching retainers for the IPC647C
are available under the following
order number: A5E02719654.
1