Siemens Simatic IPC647C, Руководство по эксплуатации

Страница: 25 / 246

Description
3.6 Installation
SIMATIC IPC647C
Operating Instructions, 12/2010, A5E02669337-02
25
Front status displays
GREEN Data traffic
OFF

No connection
 No data traffic
ETHERNET 2 * ETHERNET status
display
GREEN Data traffic
OFF
 No connection

No data traffic
PROFIBUS/MPI
(optional)
Display of the
communication status to
S7 or PROFIBUS
GREEN Data traffic
OFF

CP not available
 CP disabled

No error, communication
established
 Charging in progress

CP 1616 driver not installed
 CP in NDIS mode
Flashes slowly
 Link status error

IO controller: IO device cannot
be addressed
 IO controller: Duplicate IP
address
Flashes rapidly Exception error: diagnostics via
Web or SNMP is no longer
possible
SF PROFINET
(optional)
Status display for
CP 1616 onboard
AN
 Diagnostics information
available

No communication
established.
OFF WATCHDOG not activated
GREEN WATCHDOG monitoring enabled
WATCHDOG WATCHDOG status
display
RED Monitoring time elapsed
OFF Internal temperature OK TEMP Internal temperature
monitoring
RED Internal temperature critical
OFF Fan speed OK FAN Fan status (only with
active SOM or
DiagMonitor software)
RED Fan speed too low
OFF RAID is OK
One RED HDD1 or HDD2 not OK
Both RED RAID not OK
(for information on locating the
hard disk, refer to the
2
RAID
system (Page
Hard disk alarm in
conjunction with RAID
and monitoring software
Both flash RAID is synchronized
All displays are lit Error in early BIOS Post All lit CPU startup failure
Error in early POST
* LAN interfaces are numbered on the enclosure to provide unique identification. The numbering by
the operating system may deviate from this.