SIMATIC IPC477E
80
Operating Instructions, 11/2020, A5E37455003-AF
Expanding the device and assigning device
parameters
6
6.1
Open the device.
The device must be opened in order to install a memory expansion. Read the information in
the section "ESD guideline (Page 111)" when doing this.
Opening device with expansions
To open devices with the PCIe card expansion, you first have to dismantle this expansion. You
can find additional information on this in the following section:
•
Install and remove PCIe card (devices with PCIe card) (Page 83)
Opening device without expansions
For devices without expansions, only the rear panel of the device is removed.
Requirement
•
The device is disconnected from the power supply.
•
All cables are removed from the device.
•
The device is removed.
•
T10 screwdriver
Procedure
1.
Remove the screws marked in red.
2.
Loosen the screws marked in green.
3.
Remove the rear panel of the device.
