Siemens SIMATIC IPC427E Скачать руководство пользователя

Страница: 129 / 164

Technical specifications

8.7 BIOS description

SIMATIC IPC427E
Operating Instructions, 09/2017, A5E37454814-AB

129

8.7.5

BIOS update

Check regularly if updates are available for download to your device.
Additional information can be found on the Internet at the following address: After Sales

Information System (

http://www.siemens.com/asis

Noting down and restoring BIOS Setup settings

NOTICE
Irretrievable loss of data
All BIOS Setup settings are deleted after the BIOS update. This can put the system in an

undefined state. This may damage the device and the plant.
1.

Make a note of your specific BIOS Setup settings before the BIOS update.

Start BIOS Setup after the BIOS update.

Load the BIOS Setup default settings with <F9> "Setup Defaults". Or use the BIOS

Setup command "Load Optimal Defaults" in the "Exit" menu.

Make your own Setup settings again.

Save the BIOS Setup settings with <F10> "Save and Exit".

Performing a BIOS update

NOTICE
Damage to the device
If you switch off the device during the update, the BIOS will be incomplete and corrupt. This

may result in malfunctions.
Leave the device switched on during the update.

If you have purchased a new BIOS update for your device, follow these steps to install the

update:
1.

Connect the device to the power supply.

Copy the update to a USB memory stick.

Reset the device (warm or cold restart).
The following message appears briefly on the display at the end of the self-test:

Press ESC for boot options

Press <ESC> to open the BIOS selection menu.

Click the "BIOS Update" button.

Follow the instructions on the screen.

Содержание SIMATIC IPC427E





































































































































































Результаты поиска

Содержание SIMATIC IPC427E

Отзывы:

Похожие инструкции для SIMATIC IPC427E

Бренды по названию

Популярные бренды

Siemens SIMATIC IPC427E, Руководство по эксплуатации

Результаты поиска

Содержание SIMATIC IPC427E

Отзывы:

Похожие инструкции для SIMATIC IPC427E

Бренды по названию

Популярные бренды