Configuring the operating system
6.4 Changing settings for operation
Mobile Panel 277F IWLAN
142
Operating Instructions, 12/2007, A5E01003940-01
①
Check box for selecting the character repeat
②
Slider control and buttons for the delay time before character repeat
③
Slider control and buttons for the rate of the character repeat
④
Test box
Procedure
Proceed as follows:
1.
If you want to enable character repetition, select the "Enable character repeat" check box.
2.
If you want to change the delay, press a button or the slider in the "Repeat delay" group.
Moving the slider to the right will shorten the delay. Moving to the left will extend the
delay.
3.
If you want to change the repeat rate, press a button or the slider in the "Repeat rate"
group.
Moving the slider to the right will shorten the repeat rate. Moving to the left will extend the
repeat rate.
4.
Verify your settings.
– Touch the test box. The screen keyboard opens.
– Move the screen keyboard as needed.
– Touch any character and keep it pressed.
– Check the implementation of the character repetition and the rate of the character
repetition in the test box.
– Correct your setting if necessary.
5.
Confirm your entries.
The dialog closes.
Result
The character repetition and delay are set.
