manualshive.com logo in svg

Siemens SIMATIC HawkEye 1600T Series, Руководство пользователя

Поделиться
Скачать
Siemens SIMATIC HawkEye 1600T Series Скачать руководство пользователя страница 11

Rev. 1E, Nov 2007

SIMATIC HawkEye™ 1600T Smart Camera Guide

xi

There you can find:

•

Current product information and downloads which you may find useful for 
your product.

•

The documents you require, using our Service & Support search engine.

•

A forum where users and experts from all over the world exchange ideas.

•

Your local partner for Automation & Drives.

•

Information about onsite services, repairs, spare parts. Lots more is available 
to you on our “Service“ pages.

CE Compliance

The SIMATIC HawkEye™ 1600T has been certified to conform to the 
requirements of council Directives 2004/108/EC, 2006/95/EC and to comply 
with the following European Standards:

EN61326:1997/A1:1998/A2:2001/A3:2003 Class A
EN61000-6-2:2001
EN61000-6-2:2006
EN61000-6-4:2001
EN61010-1:2001-02

This is a Class A product, operation of this equipment in a residential area is 
likely to cause harmful interference, in which case the user will be required to 
correct the interference at his or her own expense.

All our products bearing the CE mark have been declared to be in conformance 
with the applicable EEC Council Directives. However, certain factory installed 
options or customer requested modifications may compromise electromagnetic 
compatibility and prohibit use of the CE mark. Please note that the use of 
interconnect cables that are not properly grounded and shielded may affect CE 
compliance.

A copy of the Certificate of Conformity is available on the Service and Support 
website (see previous page).

Содержание SIMATIC HawkEye 1600T Series
















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды