Siemens SIMATIC Field PG P4, Руководство пользователя

Страница: 106 / 144

Reinstallation of the Software
8-2
SIMATIC Field PG P4 Manual
A5E00180080-04
8.1 Cause / Remedy
In case of software errors reinstall your software using the Recovery CD, the
Backup PG DVD and the Restore CD.
Recovery CD: contains the tools for installing the hard disk and the
operating systems.
Backup PG DVD: contains the documentation, the SIMATIC Software and the
hardware drivers.
Restore CD: contains an hard disk Image file with the original delivery
software (Operating system with installed hardware drivers).
You can boot from the Restore CD and Recovery CD by pressing the ESC key
when the BIOS message “Press <F2> to enter Setup” is displayed.
To restore all directories and files that were copied to your hard disk at the first set
up proceed as follows:
1. Verify whether you can save your authorization or License Key to the hard disk
and proceed as described below.
2. If it is not possible to save your authorization or License Key please contact the
customer support hotline (see Getting Started). They will provide you with the
information necessary for your transferring your authorization or License Key.
Then proceed as described in Section 8.2.
Saving Authorization or License Key on Diskettes
Please proceed as follows:
•
Insert the License Key Disk in drive A:
•
Click Start on the Windows task bar and
•
Select Simatic > License Management > Automation License Manager to
open the Automation License Manager which will help you to save all
authorizations or License Keys on your License Key Disk.