Siemens SIMATIC EM 300 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 74

Siemens SIMATIC EM 300 Скачать руководство пользователя страница 4

SIMATIC - EM 300 Motor Starters

ii

GWA-4NEB 640070302-05

Important Information

Applicability

This manual is valid for the EM 300 motor starters. It contains a description of
the components that were valid at the time the manual was published. We
reserve the right to enclose a Product Information bulletin containing up-to-date
information about new components and new versions of components.

Standards, Certificates and Approvals

The ET 200X distributed I/O device is based on EN 50170, Volume 2, PROFIBUS.
The ET 200X complies with the requirements and criteria of IEC 61131, Part 2 as
well as the requirements of the CE marking. CSA, UL and FM certifications
habe been obtained for the ET 200X. You will find detailed information on these
standards, certificates and approvals in the

ET 200X Distributed I/O Device

manual.

Position in the Information Landscape

In addition to the ET 200X manuals, you will also need the manual for the DP
master used and the documentation for the configuration and programming
software used (see the list in Appendix A of the

ET 200X Distributed I/O Device

manual).

Note

You will find a detailed list of the contents of the ET 200X manuals in Section 1.3
of this manual.

We recommend that you begin by reading this section so as to find out which
parts of which manuals are most relevant to you in helping you to do what you
want to do.

Aids to Finding Information

You can quickly access specific information in the manual by using the following
aids:

• At the beginning of the manual you will find a comprehensive table of con-

tents.

• The sections of the chapters in the manual contain subheadings that allow

you to gain a quick overview of the content of the section.

• At the end of the manual you will find a detailed index that enables you to

find the information you require quickly and easily.

«
...
2
3
4
5
6
...
»

Содержание SIMATIC EM 300











































































Отзывы:

Нет отзывов