Siemens SIMATIC CP 4163-1, Руководство по эксплуатации

Страница: 43 / 51

Approvals
SIMATIC CP 4163-1
Operating Instructions, 12/2022, C79000-G8976-C588-01
43
The product meets the explosion protection requirements outlined below.
WARNING
Observe installation guidelines
The product meets the requirements if you observe the following during installation and
operation:
•
The notes in the section Important notes on using the device (Page 23)
• The installation instructions in the document /2/ (Page 49)
IECEx
Classification: Ex ec IIC T4 Gc, Certificate no.: DEK 18.0019X
The product meets the requirements of the standards:
•
EN IEC 60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements
• EN 60079-7 - Explosive Atmospheres - Part 7: Equipment protection by increased safety 'e'
ATEX
Classification: II 3G Ex ec IIC T4 Gc, Certificate no.: DEKRA 18ATEX0027 X
The product meets the requirements of the standards:
•
EN IEC 60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements
• EN 60079-7 - Explosive Atmospheres - Part 7: Equipment protection by increased safety 'e'
UKEX
Classification: Ex ec IIC T4 Gc, Certificate no.: DEKRA 21UKEX0003 X
The product meets the requirements of the standards:
•
EN IEC 60079-0 - Explosive atmospheres - Part 0: Equipment - General requirements
• EN 60079-7 - Explosive Atmospheres - Part 7: Equipment protection by increased safety 'e'
Importer UK: Siemens plc (see above)
CCC
Classification: Ex na IIC T4 Gc
The product meets the requirements of the following standards:
•
GB 3836.1
Hazardous areas - Part 0: Equipment - General requirements
• GB 3836.3
Explosive atmospheres - Part 3: Equipment protection by increased safety "e"
• GB 3836.8
Explosive atmospheres - Part 15: Equipment protection by type of protection 'n'