Siemens SENTRON PROFINET Proxy SPP2000 страница 10 Скачать руководство пользователя

Страница: 10 / 90

Introduction

1.5 Open Source Software

PROFINET Proxy SPP2000

Equipment Manual, 03/2022, L1V30814715D-01

1.5

Open Source Software

This product, solution or service ("Product") contains third-party software components. These

components are Open Source Software licensed under a license approved by the Open

Source Initiative (

http://www.opensource.org

) or similar licenses as determined by SIEMENS

("OSS") and/or commercial or freeware software components. With respect to the OSS

components, the applicable OSS license conditions prevail over any other terms and

conditions covering the Product. The OSS portions of this Product are provided royalty-free

and can be used at no charge.
If SIEMENS has combined or linked certain components of the Product with/to OSS

components licensed under the GNU LGPL version 2 or later as per the definition of the

applicable license, and if use of the corresponding object file is not unrestricted ("LGPL

Licensed Module", whereas the LGPL Licensed Module and the components that the LGPL

Licensed Module is combined with or linked to is the "Combined Product"), the following

additional rights apply, if the relevant LGPL license criteria are met: (i) you are entitled to

modify the Combined Product for your own use, including but not limited to the right to

modify the Combined Product to relink modified versions of the LGPL Licensed Module, and

(ii) you may reverse-engineer the Combined Product, but only to debug your modifications.

The modification right does not include the right to distribute such modifications and you

shall maintain in confidence any information resulting from such reverse-engineering of a

Combined Product.
Certain OSS licenses require SIEMENS to make source code available, for example, the GNU

General Public License, the GNU Lesser General Public License and the Mozilla Public License.

If such licenses are applicable and this Product is not shipped with the required source code, a

copy of this source code can be obtained by anyone in receipt of this information during the

period required by the applicable OSS licenses by contacting the following address:
Siemens AG

Smart Infrastructure

Electrical Products

Technical Support

Postfach 10 09 53

93009 Regensburg

Germany
You will find Technical Support under (

https://support.industry.siemens.com/cs/us/en/ps

Keyword: Open Source Request (please specify Product name and version, if applicable)
SIEMENS may charge a handling fee of up to 5 EUR to fulfil the request.

Warranty regarding further use of the Open Source Software

SIEMENS' warranty obligations are set forth in your agreement with SIEMENS. SIEMENS does

not provide any warranty or technical support for this Product or any OSS components

contained in it if they are modified or used in any manner not specified by SIEMENS. The

license conditions may contain disclaimers that apply between you and the respective

licensor. For the avoidance of doubt, SIEMENS does not make any warranty commitment on

behalf of or binding upon any third-party licensor. The Open Source Software used in the

product and the license agreements concerning this software can be found in the

Readme_OSS.

Содержание SENTRON PROFINET Proxy SPP2000



























































































Результаты поиска

Содержание SENTRON PROFINET Proxy SPP2000

Отзывы:

Похожие инструкции для SENTRON PROFINET Proxy SPP2000

Бренды по названию

Популярные бренды

Siemens SENTRON PROFINET Proxy SPP2000, Руководство пользователя

Результаты поиска

Содержание SENTRON PROFINET Proxy SPP2000

Отзывы:

Похожие инструкции для SENTRON PROFINET Proxy SPP2000

Бренды по названию

Популярные бренды