Siemens SENTRON 7KT PAC1600 Series Скачать руководство пользователя страница 19

Страница: 19 / 76

Description

3.3 7KT PAC1600 multimeter

7KT multimeter
Manual, 08/2018, 2514284149-01

Access the main menu

Press the Menu key.

The main menu is displayed with the available options:
–

SET: Access the setup menu

–

CMD: Access the command menu

–

PAS: Password entry

The selected option flashes.
The text for the selection scrolls in the alphanumeric display.

Set password

If the password needs to be set, the menu opens with the PAS option already selected.
1.

Press or to select an option.

Confirm with .

Press the Menu key to return to the measurement display.

3.3.2

Selection of measured values

Use the keys and to scroll through the measurement display pages. The current page

is indicated by the unit in the upper left section of the display.
Some measurements may not be displayed on the device depending on programming and

the connection. If you have programmed for a system without a neutral conductor, for

example, the measurements for the neutral conductor will not be displayed.

Содержание SENTRON 7KT PAC1600 Series













































































Результаты поиска

Содержание SENTRON 7KT PAC1600 Series

Отзывы:

Siemens SENTRON 7KT PAC1600 Series, Руководство пользователя, Страница: 19 / 76

Результаты поиска

Содержание SENTRON 7KT PAC1600 Series

Отзывы: