Operating Instructions
LCD-Monitor SCD 1597-R/RT/R8S
Page 11 / 22
DOC-Nr.: B3 0038 D4.DOC
2.3. Cable Connections and Pin Assignments
The LCD-monitor has been tested and set-up in the factory. Before use, the power supply
and the VGA signals should be connected to the sockets provided. Connections to the
monitor should adhere to EMC regulations.
A high-quality 75-ohm coaxial cable must be used for the VGA-signals. Low quality cables
can result in interference and shadowing on the display.
VGA-Interface
The VGA interface is a standard 15-pin male HD-D-type connector.
Figure 2: VGA-interface
Pin
Signal
1
Video input RED
2
Video input GREEN
3
Video input BLUE
4
Not used
5
Not used
6
GND (RED)
7
GND (GREEN)
8
GND (BLUE)
9
Not used
10
GND
11
Not used
12
Not used
13
H-Sync.
14
V-Sync.
15
Not used
