Siemens SCALANCE XR-300M PoE Series Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 92

background image

5.4

Safety requirements - Installation 100 to 240 VAC

Safety requirements for installation

According to the IEC 61131-2 standard and therefore in accordance with the EU directive
2006/95/EC (Low Voltage Directive), the devices are "open equipment" and in accordance with
UL/CSA certification, they are an "open type".

To fulfill requirements for safe operation with regard to mechanical stability, flame retardation,
stability, and shock-hazard protection, the following alternative types of installation are
specified:

• Installation in a suitable cabinet.

• Installation in a suitable enclosure.

• Installation in a suitably equipped, enclosed control room.

5.5

19" rack mounting

WARNING

Danger of injury by falling objects

If you do not use the supplied mounting brackets for 19"rack installation, it is not possible to
install the device correctly.

Use only the supplied mounting brackets.

There are several ways of fixing the mounting brackets depending on the mounting position
required.

19" rack mounting

19" rack mounting is possible for all rack devices identified by (XR).
Refer to the technical specifications, Installation options table for each product group. The rack
device is installed using two mounting brackets fitted to the front. After fitting the two mounting
brackets, the rack device can then be installed in a 19" cabinet.

NOTICE
Do not cover the ventilation grilles

During installation, select a mounting position so that the ventilation grilles are always free to
achieve adequate cooling. With normal orientation, the ventilation grilles are on the top,
bottom and sides of the housing.

If you install more than one rack device, make sure that the permitted ambient conditions are
met for all devices in the rack.

Installation and disassembly
5.5 19" rack mounting

SCALANCE XR-300M PoE

36

Compact Operating Instructions, 03/2022, A5E02661178-15

«
...
34
35
36
37
38
...
»

Содержание SCALANCE XR-300M PoE Series





























































































Отзывы:

Нет отзывов

Похожие инструкции для SCALANCE XR-300M PoE Series

xStack DGS-3420 Series

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 29

Бренд: D-Link Страницы: 454

Бренд: D-Link Страницы: 502

Бренд: D-Link Страницы: 244

Бренд: D-Link Страницы: 20

Бренд: D-Link Страницы: 2

Бренд: D-Link Страницы: 37

Бренд: D-Link Страницы: 28

D-PFS4226-24ET-240

Бренд: Dahua Страницы: 58

Бренд: Datavideo Страницы: 58

TNS5800-8GP16GT-P24VDC

Бренд: 3onedata Страницы: 3

Бренд: IDEM SAFETY SWITCHES Страницы: 2

Бренд: Woxcon Страницы: 42

Бренд: Cabletron Systems Страницы: 14

Бренд: IOGear Страницы: 1

Master View CS-74A

Бренд: ATEN Страницы: 16

enbrighten 51253

Бренд: Jasco Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды