Siemens SCALANCE XR-300M PoE Series Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 92

background image

Installation in a 19" rack

19" rack mounting
1.

Select the required rack device and the 19" cabinet.

2.

Fix the two mounting brackets with 4 screws each to
the sides of the housing. The maximum tightening tor‐
que for these screws is 0.5 Nm.

CAUTION: If you install a rack device with components
inserted.
The locking mechanisms of components installed in
the rack device (for example the handles of media
modules or the clips on the SFP) must be closed.
See also installation of modular devices:
- Installing media modules in a slot
- Installing an SFP in an SFP media module.

4.

Insert the rack device in the 19" cabinet and hold the
rack device at the required height. Make sure that noth‐
ing is obstructing air from entering the ventilation
grilles.
Fit the securing screws to the two mounting brackets to
secure the rack device in the 19" cabinet.

5.

Fit the connectors for the power supply.
Note that the SCALANCE X-300 is available for different
power supplies (100 to 240 VAC and 24 VDC variants).

6.

Fit the remaining connectors, for example the signal‐
ing contact.

Removal

Removing from the rack
1.

Turn off the power supply for the SCALANCE XR-300M.

2.

Disconnect all cables for data traffic and the connectors for the power supply and the grounding cable.

3.

Undo the screws on the mounting bracket and remove the rack device from the 19" cabinet.
If necessary, release the locking mechanisms of components inserted in the rack device (for example handles on the
media module or clips on the SFP) to be able to remove the media modules (MM900) or the transceiver (SFP).

Installation and disassembly

5.5 19" rack mounting

SCALANCE XR-300M PoE
Compact Operating Instructions, 03/2022, A5E02661178-15

39

«
...
37
38
39
40
41
...
»

Содержание SCALANCE XR-300M PoE Series





























































































Отзывы:

Нет отзывов

Похожие инструкции для SCALANCE XR-300M PoE Series

Бренд: N-Tron Страницы: 2

Бренд: Touch-plate Страницы: 12

Бренд: FS Страницы: 33

Бренд: SMART Страницы: 46

SmartSwitch 2500

Бренд: Cabletron Systems Страницы: 402

Бренд: E&C Страницы: 10

Omni-Rupter Series

Бренд: S&C Страницы: 31

IES-5222T Series

Бренд: Lantech Страницы: 30

SI1P-SH-DVI-UCAC

Бренд: Black Box Страницы: 16

Бренд: SMC Networks Страницы: 6

AVS-OCT-3264-360

Бренд: AMX Страницы: 1

Бренд: Xantech Страницы: 12

Бренд: Velleman Страницы: 4

Бренд: ATEN Страницы: 21

Бренд: Gefen Страницы: 9

Бренд: Linksys Страницы: 4

BOEING 737 STYLE

Бренд: Precision Flight Controls Страницы: 8

Бренд: ENSIM SENSORS Страницы: 15

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды