Description
3.7 Removing and inserting the C-PLUG (compact housing)
SCALANCE X-300M
22
Compact Operating Instructions, 10/2014, A5E02630801-06
3.7
Removing and inserting the C-PLUG (compact housing)
NOTICE
A C-PLUG may only be removed or inserted when the device is turned off.
Position of the C-PLUG
In devices with a compact housing, the C-PLUG is located behind
the sealing screw on the rear of the device. To remove the sealing
screw, use a coin or a wide blade screwdriver.
Removing the C-PLUG
1.
Turn off the power to the device.
2.
Remove the sealing screw on the rear of the device with a coin
or a wide blade screwdriver.
3.
Insert a screwdriver between the front edge of the C-PLUG
(position A) and the slot and release the C-PLUG.
4.
Remove the C-PLUG and close the housing again with the
sealing screw.
Inserting the C-PLUG
1.
Turn off the power to the device.
2.
Remove the sealing screw on the rear of the device with a coin
or a wide blade screwdriver.
3.
The housing of the C-PLUG has a protruding ridge on the long
side (position B). The slot has a groove at this position. Insert
the C-PLUG correctly oriented into the slot.
4.
Close the housing again with the sealing screw.
