Introduction
1.1 Introduction to the X-300M
SCALANCE X-300M
6
Compact Operating Instructions, 10/2014, A5E02630801-06
Security messages
Note
Siemens offers IT security mechanisms for its automation and drive product portfolio in order
to support the safe operation of the plant/machine. Our products are also continuously
developed further with regard to IT security. We therefore recommend that you regularly
check for updates of our products and that you only use the latest versions. You will find
information in:
(
http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo2&aktprim=99&lang=
en
)
Here, you can register for a product-specific newsletter.
For the safe operation of a plant/machine, however, it is also necessary to integrate the
automation components into an overall IT security concept for the entire plant/machine,
which corresponds to the state-of-the-art IT technology. You will find information on this in:
(
http://www.siemens.com/industrialsecurity
)
Products from other manufacturers that are being used must also be taken into account.
SIMATIC NET glossary
Explanations of many of the specialist terms used in this documentation can be found in the
SIMATIC NET glossary.
You will find the SIMATIC NET glossary here:
●
SIMATIC NET Manual Collection or product DVD
The DVD ships with certain SIMATIC NET products.
●
On the Internet under the following entry ID:
50305045 (
http://support.automation.siemens.com/WW/view/en/50305045
)
