Siemens SCALANCE S615, Руководство по настройке

Страница: 24 / 442

Description
1.4 Symbols of the CLI commands
SCALANCE S615 Command Line Interface
24
Configuration Manual, 06/2015, C79000-G8976-C406-02
1.4 Symbols of the CLI commands
Symbols for representing CLI commands
When setting parameters for CLI commands, the following characters are used:
Charac-
ter
Meaning
< ... > mandatory parameter Instead of the expression in parenthesis, enter a value.
[ ... ] optional parameter Instead of the expression in parenthesis, you can enter a
value.
( ... ) Value or range of values Instead of the expression in parenthesis, enter a value.
( ... - ... ) Range of values Enter a value from this range.
{ ... } Selection list Select one more elements from the list.
{ ... | ... } exclusive selection Select exactly one element from this list.
These characters are used in combinations to describe mandatory and optional entries.
There is a general description of some of these combinations below:
Character combinations Meaning
< Parameter > Instead of the expression in parentheses<>, enter a permitted
value.
< < Unit (a - b) > Instead of the expression in parentheses <>, enter a value from
the range "a" to "b".
The unit to be used is specified before the brackets () and is
also replaced by the entry.
[<Parameter 1 >< Parameter 2 >] The parameter pair is optional.
If you use the parameter assignment, you need to enter a per-
mitted value to replace both expressions in parenthesis <>.
[ [ Keyword < Unit (a - b)>] The parameter assignment is optional.
If you use the keyword, you need to enter a value from the
range "a" to "b" to replace the expression in parenthesis <>.
[keyword { A | B | C }] The parameter assignment is optional.
If you use the keyword, you need to specify exactly one of the
values "A", "B" or "C".
Keyword [A] [B] [C] After the keyword, enter no or several of the values "A", "B" or
"C".