Siemens SCALANCE M812 Скачать руководство пользователя страница 71

Страница: 71 / 74

cULus Approval for Information Technology Equipment

cULus Listed I. T. E.

Underwriters Laboratories Inc. complying with

• UL 62368-1

• CSA C22.2 No. 62368-1

Report no. E115352

cULus approval for industrial control equipment

cULus Listed I. T. E.

Underwriters Laboratories Inc. complying with

• UL 61010-1

• UL 61010-2-201

• CSA C22.2 NO 61010-1

• CSA C22.2 NO 61010-2-201

Report no. E115352

cULus Approval Hazardous Location

cULus Listed I. T. E. for HAZ. LOC.

Underwriters Laboratories Inc. complying with

• UL 121201 (Non Incendive electrical equipment) approved for use in Class I, Division 2,

Groups A, B, C, D, T4.

• UL CSA C22.2 NO 213 (Non Incendive electrical equipment) approved for use in Class I, Zone

2, Group IIC, T4.

Note for Australia - RCM

The product meets the requirements of the RCM standard.

Applied standards:

• AS/NZS CISPR11 (Industrial, scientific and medical equipment - Radio-frequency disturbance

characteristics - Limits and methods of measurement).

• EN 61000-6-4 Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission

standard for industrial environments

You will find the current versions of the standards in the currently valid RCM SDoCs (Self-
Declaration of Conformity).

Approvals

9.3 General approvals

SCALANCE M826
Operating Instructions, 10/2022, C79000-G8976-C362-07

Содержание SCALANCE M812











































































Результаты поиска

Содержание SCALANCE M812

Отзывы:

Siemens SCALANCE M812, Руководство по эксплуатации, Страница: 71 / 74

Результаты поиска

Содержание SCALANCE M812

Отзывы: