manualshive.com logo in svg

Siemens SCALANCE M812, Руководство по эксплуатации, Страница: 69 / 74

Поделиться
Скачать
Siemens SCALANCE M812 Скачать руководство пользователя страница 69

9.2.2

The Electromagnetic Compatibility Regulations 2016

Electromagnetic compatibility

The SIMATIC NET products described in these operating instructions meet the requirements of 
"The Electromagnetic Compatibility Regulations 2016".

Applied standards:

• EN 50121-3-2

Railway applications - Electromagnetic compatibility - part 3-2: Railway Vehicles - Devices

• EN 50121-4

Railway applications - Electromagnetic compatibility - part 4: Emission and immunity of the 
signaling and telecommunications apparatus

• EN 61000‑6‑2

Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial 
environments

• EN 61000‑6‑4

Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for 
industrial environments

9.2.3

The Restriction of the Use of Certain Hazardous Substances in Electrical and 
Electronic Equipment Regulations 2012

Restriction of the use of certain hazardous substances

The SIMATIC NET products described in these operating instructions meet the requirements of 
"The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic 
Equipment Regulations 2012".

Applied standard:

• EN IEC 63000

Technical documentation for the assessment of electrical and electronic products with 
respect to restriction of hazardous substances 

Approvals

9.2 UK Declaration of Conformity

SCALANCE M826
Operating Instructions, 10/2022, C79000-G8976-C362-07

69

Содержание SCALANCE M812











































































Отзывы:

Нет отзывов