Siemens RUGGEDCOM RX1100P Скачать руководство пользователя

Страница: 5 / 50

RUGGEDCOM RX1100P

Installation Guide

Preface

Alerts

Preface

This guide describes the RUGGEDCOM RX1100P. It describes the major features of the device, installation,

commissioning and important technical specifications.
It is intended for use by network technical support personnel who are responsible for the installation,

commissioning and maintenance of the device. It is also recommended for use by network and system planners,

system programmers, and line technicians.

Alerts

The following types of alerts are used when necessary to highlight important information.

DANGER!

DANGER alerts describe imminently hazardous situations that, if not avoided, will result in death or

serious injury.

WARNING!

WARNING alerts describe hazardous situations that, if not avoided, may result in serious injury and/or

equipment damage.

CAUTION!

CAUTION alerts describe hazardous situations that, if not avoided, may result in equipment damage.

IMPORTANT!

IMPORTANT alerts provide important information that should be known before performing a procedure

or step, or using a feature.

NOTE

NOTE alerts provide additional information, such as facts, tips and details.

Related Documents

Other documents that may be of interest include:
•

ROX User Guide for the RX1100P

Accessing Documentation

The latest Hardware Installation Guides and Software User Guides for most RUGGEDCOM products are

available online at

www.siemens.com/ruggedcom

Содержание RUGGEDCOM RX1100P



















































Результаты поиска

Содержание RUGGEDCOM RX1100P

Отзывы:

Похожие инструкции для RUGGEDCOM RX1100P

Бренды по названию

Популярные бренды

Siemens RUGGEDCOM RX1100P, Руководство по установке

Результаты поиска

Содержание RUGGEDCOM RX1100P

Отзывы:

Похожие инструкции для RUGGEDCOM RX1100P

Бренды по названию

Популярные бренды