Siemens RUGGEDCOM RX1100P, Руководство по установке

Страница: 27 / 50

RUGGEDCOM RX1100P
Installation Guide
Chapter 3
Communication Ports
Modem Port 21
Pin Name Description
5 Reserved (Do Not Connect)
6 Reserved (Do Not Connect)
7 T Receive data
from network (Tip)
8 R Receive data from
network (Ring)
Section 3.6
Modem Port
The RX1100P can optionally be equipped with a V.90 Modem connection for PPP (Point-to-Point Protocol)
connections. For information about how to configure and operate the modem, refer to the ROX User Guide for the
RX1100P.
WARNING!
Fire hazard – risk of serious personal injury and/or damage to equipment. To reduce the risk of fire, use
only #26 AWG or larger telecommunication line cord.
The modem card is equipped with a standard RJ11 telephone port. The following is the pin-out description for the
RJ11 port:
1 6
Figure 24: RJ11 Port Pin Configuration
Pin Description
1 Reserved (Do Not Connect)
2 Reserved (Do Not Connect)
3 Ring
4 Tip
5 Reserved (Do Not Connect)
6 Reserved (Do Not Connect)
NOTE
This product meets the applicable Industry Canada technical specifications.
The Ringer Equivalence Number is an indication of the maximum number of devices allowed to be
connected to a telephone interface. The termination on an interface may consist of any combination of
devices subject only to the requirement that the sum of the RENs of all the devices does not exceed
five.
Section 3.7
Serial Ports
The RX1100P supports serial cards with RJ45 serial ports. Serial RJ45 ports can be run in RS232, RS485 or
RS422 mode.