Siemens RUGGEDCOM RSG2488, Руководство по установке

Страница: 12 / 56

Chapter 1
Introduction
RUGGEDCOM RSG2488
Installation Guide
2 Description
• -40 to 85 °C (-40 to 185 °F) operating temperature (fan-less)
• Conformal coated printed circuit boards (optional)
Section 1.2
Description
The RUGGEDCOM RSG2488 features various ports, controls and indicator LEDs on the front panel for connecting,
configuring and troubleshooting the device.
5
1
8
2
3 6 7 9
11 12
11
4 4
10
Figure 1: RUGGEDCOM RSG2488
1. Front 2. Rear 3. Power Modules 4. Power Status LEDs 5. RS-232 Serial Console Port (DB9) 6. Management Port 7. Alarm
Indicator LED 8. Access Plate 9. Port Status LEDs 10. Line Modules 11. Power Supply Terminal Block 12. Chassis Ground Terminal
Power Status LEDs Indicates the status of the power modules.
LED Description
I The power module is receiving power
O The power module is supplying power
RS-232 Console Port The serial console port is for interfacing directly with the device and accessing initial
management functions. For information about connecting to the device via the serial
console port, refer to Section 2.9, “Connecting to the Device” .
Management Port The 10/100Base-T Ethernet management port is for system management that is out-of-band
from the switch fabric. For information about connecting to the device via the 10/100Base-T
Ethernet management port, refer to Section 2.9, “Connecting to the Device” .
Alarm Indicator LED The alarm indicator LED illuminates when an alarm condition exists.
Access Plate The removable access plate provides access to the microSD slot. Use a microSD card to load/
store the firmware and configuration for the device. For information about using a microSD
card, refer to Section 2.8, “Inserting/Removing the MicroSD Card” .
Port Status LEDs Port status indicator LEDs indicate the operational status of each port.