Siemens RUGGEDCOM MX5000RE, Справочное руководство

Страница: 66 / 148

Chapter 6
RUGGEDCOM ROX II Actions
RUGGEDCOM NETCONF
Reference Guide
54 Admin Namespace Actions
Action Path to Action in RUGGEDCOM ROX II
Section 6.2.11, “clear-cable-stats-port (Switch Port)”
interfaces » switch{interface} » diagnostics » clear-cable-stats-
port
Section 6.3.1, “ntp-status” services » time » ntp » ntp-status
Section 6.3.2, “log (Link-Failover)” services » link-failover{interface} » log
Section 6.3.3, “start-test (Link Failover)” services » link-failover{interface} » start-test
Section 6.3.4, “cancel-test (Link Failover)” services » link-failover{interface} » cancel-test
Section 6.3.5, “show-active-leases (DHCP Server)” services » dhcpserver » show-active-leases
Section 6.4.1, “clear-stp-stats (Switch)” switch » spanning-tree » clear-stp-stats
Section 6.4.2, “flush-dynamic-rules (Switch)” switch » layer3-switching » flush-dynamic-rules
Section 6.4.3, “reset-all-switch-ports (Switch)” switch » reset-all-switch-ports
Section 6.4.4, “clear-all-switch-stats (Switch)” switch » clear-all-switch-stats
Section 6.4.5, “clear-cable-stats-all (Switch)” switch » clear-cable-stats-all
CONTENTS
• Section 6.1, “Admin Namespace Actions”
• Section 6.2, “Interfaces Namespace Actions”
• Section 6.3, “Services Namespace Actions”
• Section 6.4, “Switch Namespace Actions”
• Section 6.5, “Tunnel Namespace Actions”
Section 6.1
Admin Namespace Actions
This section describes how to perform actions related to administration namespaces using
<rpc>
messages
through NETCONF.
CONTENTS
• Section 6.1.1, “snmp-discover”
• Section 6.1.2, “launch-upgrade”
• Section 6.1.3, “decline-upgrade”
• Section 6.1.4, “rollback-reboot”
• Section 6.1.5, “roxflash”
• Section 6.1.6, “clear-all-alarms”
• Section 6.1.7, “acknowledge-all-alarms”
• Section 6.1.8, “shutdown”
• Section 6.1.9, “reboot”
• Section 6.1.10, “set-system-clock”