Siemens RUGGEDCOM MX5000RE Скачать руководство пользователя страница 28

Страница: 28 / 148

Chapter 2

NETCONF Capabilities and Namespaces

RUGGEDCOM NETCONF

Reference Guide

IETF Capabilities

Capabilities

Description

<capability>urn:ietf:params:netconf:capability:writable-

running:1.0</capability>

Supports writing to the running configuration: you can update

configuration data in the running configuration.
For more information on this capability, see

Internet Engineering

Task Force RFC 6241

[http://tools.ietf.org/html/rfc6241].

<capability>urn:ietf:params:netconf:capability:candidate:1.0</

capability>

Supports a candidate configuration: you can make changes to a

candidate configuration, validate and review the changes, and then

commit the candidate to make it the running configuration.
For more information on this capability, see

Internet Engineering

Task Force RFC 6241

[http://tools.ietf.org/html/rfc6241].

<capability>urn:ietf:params:netconf:capability:confirmed-

commit:1.0</capability>

Supports the confirmed commit operation: you can require that a

commit be confirmed before a candidate configuration is promoted

to become the running configuration.
For more information on this capability, see

Internet Engineering

Task Force RFC 6241

[http://tools.ietf.org/html/rfc6241].

<capability>urn:ietf:params:netconf:capability:XPath:1.0</

capability>

Supports the use of XPath expressions: you can used XPath

expressions in the <filter> element to define the path to the

configuration item to be retrieved or set.
For more information on this capability, see

Internet Engineering

Task Force RFC 6241

[http://tools.ietf.org/html/rfc6241].

<capability>urn:ietf:params:netconf:capability:url:1.0?

scheme=ftp,sftp,file</capability>

Supports file transfer for configuration data: you can upload or

download configuration data as a file through a specified protocol.
For more information on this capability, see

Internet Engineering

Task Force RFC 6241

[http://tools.ietf.org/html/rfc6241].

<capability>urn:ietf:params:netconf:capability:validate:1.0</

capability>

Supports the validate operation: you can validate a specified

configuration for syntax errors.
For more information on this capability, see

Internet Engineering

Task Force RFC 6241

[http://tools.ietf.org/html/rfc6241].

<capability>urn:ietf:params:netconf:capability:rollback-on-

error:1.0</capability>

Supports the rollback-on-error operation: you can require the

configuration to roll back to its previous state if a commit fails.
For more information on this capability, see

Internet Engineering

Task Force RFC 6241

[http://tools.ietf.org/html/rfc6241].

<capability>urn:ietf:params:netconf:capability:notification:1.0</

capability>

Supports the notification operation: you can have the NETCONF

server advise a NETCONF client of changes to the configuration data

or device state.
For more information on this capability, see

Internet Engineering

Task Force RFC 5277

[http://tools.ietf.org/html/rfc5277].

<capability>urn:ietf:params:netconf:capability:interleave:1.0</

capability>

Supports the interleave capability: the device handles NETCONF

notification messages and other NETCONF operations

asynchronously.
For more information on this capability, see

Internet Engineering

Task Force RFC 5277

[http://tools.ietf.org/html/rfc5277].

<capability>urn:ietf:params:netconf:capability:partial-lock:1.0</

capability>

Supports the partial-lock capability: you can lock a specified portion

of the configuration database for updating.
For more information on this capability, see

Internet Engineering

Task Force RFC 5717

[http://tools.ietf.org/html/rfc5717].

<capability>urn:ietf:params:netconf:capability:with-defaults:1.0?

basic-mode=trim&also-supported=report-all-tagged</capability>

Supports the with-defaults capability: you can control how the

NETCONF server reports default data in the data model.
For more information on this capability, see

Internet Engineering

Task Force RFC 6243

[http://tools.ietf.org/html/rfc6243].

Содержание RUGGEDCOM MX5000RE





















































































































































Результаты поиска

Содержание RUGGEDCOM MX5000RE

Отзывы:

Похожие инструкции для RUGGEDCOM MX5000RE

Бренды по названию

Популярные бренды

Siemens RUGGEDCOM MX5000RE, Справочное руководство

Результаты поиска

Содержание RUGGEDCOM MX5000RE

Отзывы:

Похожие инструкции для RUGGEDCOM MX5000RE

Бренды по названию

Популярные бренды