Siemens RM400 C Series, Руководство по эксплуатации

Страница: 20 / 227

10
RM400 C Models U24802-J-Z146-2-7600
2
Important notes
●
Route the cables in such a way that they do not form a potential hazard (make
sure no-one can trip over them) and are unlikely to suffer damage. When
connecting up a device, refer to the associated notes in this manual.
●
Never connect or disconnect data transmission lines during a storm.
●
When connecting up the system, work in the order as described in the section
“Attaching peripherals” on page 39“.
●
Only the SNI service department should be allowed to install and deinstall
peripherals cabinets.
●
Systems which comprise a number of cabinets must have a separate fused
socket for each cabinet.
●
The cabinets and directly connected external peripheral devices should be
connected to the same power distributor.
●
It is essential that you mount the stabilizers on the housing feet.
●
Make sure that no objects (such as bracelets or paper clips) or liquids fall into
the device, as this may result in an electric shock or a short circuit.
●
In emergencies (e.g. damage to housings, power cords or controls or ingress
of liquids or foreign bodies), immediately power down the device, pull out the
power plugs and notify the SNI service department.
●
Note that proper operation of the system in accordance with IEC 950/EN60950
is guaranteed only if the housing cover is mounted (cooling, fire protection, RFI
suppression).
●
Before opening the system unit, first switch off the device and then pull out the
power plugs.
Repairs to the device should only be made by authorized specialists. Unautho-
rized opening and inadequate repairs may put the user at considerable risk.
Unauthorized opening of devices results in invalidation of the warranty and
exclusion of liability.
●
Batteries should be replaced by skilled personnel only.