Siemens QUADLOG Скачать руководство пользователя страница 59 | Manualshive

Страница: 59 / 66

Siemens QUADLOG Скачать руководство пользователя страница 59

SD39RIO-1 ACCESSORIES, ATTACHMENTS, AND OPTIONS

January 2001

5-1

5.0 Accessories, Attachments, and Options

5.1 Accessories

Table 5-1 lists the accessories for the Remote I/O Rack.

TABLE 5-1 Remote I/O Rack Accessories

Part Number

Description

16137-60 (single piece) Power Supply Cable. Connects Remote I/O Rack to 24 Vdc power supply.

16056-593

M-BUS/IOBUS Cable Adapter Kit. Converts connector spring latch type
security to screw lock type security (and vice versa)

5.2 Attachments

Table 5-2 lists the attachments that are provided with each Remote I/O Rack.

TABLE 5-2 Remote I/O Rack Attachments

Part Number

Description

16056-384

Remote I/O Rack Keying Kit. A bag containing 24 stop plugs to mechanically
interface I/O modules to the Remote I/O Rack. Kit comes attached to the
rack.

14784-9 (single piece)

Jumpers W1 to W3 (OK Loop). Factory installed in the backplane assembly.

16066-21 (single piece)

IOBUS Shunt Module Assembly (W4). Factory installed in the backplane.

16405-1 (single piece)

IOBUS Attenuator Module Assembly. Included with rack.

5.3 Options

Table 5-3 lists the options for the Remote I/O Rack. Consult your system drawings to determine the quantity
and types of optional cables required. The Remote I/O Rack requires a selection of terminated or
unterminated Interconnect I/O Cable Assemblies and a selection of IOBUS A/B cables. If fiber optics are
involved, a Fiber Optic Expander (IFX) and fiber optic cable are required.

«
...
57
58
59
60
61
...
»

Содержание QUADLOG



































































Отзывы:

Нет отзывов