Siemens OP15 Скачать руководство пользователя страница 85 | Manualshive

Страница: 85 / 177

Siemens OP15 Скачать руководство пользователя страница 85

10-3

Manual OP5, OP15
( ) J31069-D0840-U001-A2-7618

You can adjust the current date and time on the OP – for example, to allow
for summer or winter time. Any change you make will affect all messages
and screens for which a date or time variable has been defined. The display
format for date and time is defined in your configuration and cannot be
changed by means of the menu system on the OP.

1. Choose the standard screen System

→

Dat/Time.

Use the LEFT and RIGHT arrow keys to move the cursor from the date
field to the clock field and back again.
To move the LEFT and RIGHT arrow keys within the input field for the
date or time, activate Shift Lock mode beforehand so that the LED is on.
Change the day of the week using a symbolic input and the date and time
of day by means a numeric input.

2. Confirm your input by pressing the ENTER key.

3. Exit from the standard screen – for example, by pressing the ESCAPE

key.

The OP does not have a hardware clock. Since the date and time are gener-
ated by software, this information has to be updated every time the OP starts
up.

10.3 Adjusting Contrast

On the OP5 and OP15, you can adjust the contrast of the LCD. The display
contrast can be adjusted by means of

direct adjustment or a

standard screen.

The display contrast of the LCD on the OP5 and OP15 can be adjusted at all
times in normal mode by means of direct control:

1. Press SHIFT. The SHIFT LED lights.

2. Use the sign key (one-shot or continuously enabled) to set the contrast to

the value you require.

3. Press SHIFT. The SHIFT LED is off.

LCD display contrast can also be adjusted by means of a standard screen. To
do so, proceed as follows :

1. Choose the standard screen System

→

Languages.

2. Move the cursor to Contrast.

3. Select the contrast value you require by means of symbolic input

(1 for minimum contrast, 16 for maximum contrast).

Setting date and
time

Note for the OP5

Display contrast
adjustment

Direct contrast
adjustment

Contrast
adjustment by
means of a
standard screen

System Settings on Standard Screens

«
...
83
84
85
86
87
...
»

Содержание OP15


















































































































































































Отзывы:

Нет отзывов