manualshive.com logo in svg

Siemens OP15, Руководство по эксплуатации оборудования, Страница: 129 / 177

Поделиться
Скачать
Siemens OP15 Скачать руководство пользователя страница 129

20-1

Manual OP5, OP15 
( ) J31069-D0840-U001-A2-7618

Maintenance

The Operator Panels are designed for low-maintenance operation. Mainte-
nance includes

regular cleaning of the keyboard membrane and the display with a damp
cloth (water only) and

replacing the backup battery.

The procedure for changing the backup battery is described below.

The backup battery of the OP5 and the OP15 insures that, when the power
supply is turned off,

operating data are retained in the static RAM of the OP and

the hardware clock continues to run (OP15 only).

Lifetime
The OP uses a 3.6 V/approx. 1.5 Ah lithium battery. It is installed in the de-
vice ex works and has a typical life of about four years under normal operat-
ing conditions.

Battery condition
An exhausted battery is indicated by a system message during routine opera-
tion of the OP. The backup battery should be changed as quickly as possible
after the message is displayed.

Sources of supply
You can obtain new batteries from the Siemens spare parts service. They are
made ready for installation and include a cable and plug connectors.

When you handle lithium batteries, keep in mind the following advice:

OP maintenance

Backup battery

Safety notices

20

Содержание OP15


















































































































































































Отзывы:

Нет отзывов