Siemens OP15 Скачать руководство пользователя страница 18

Страница: 18 / 177

1-6

Manual OP5, OP15

( ) J31069-D0840-U001-A2-7618

1.3

Design of Operator Panel OP5

The OP5 is available in the following two versions:

OP5/A1 and

OP5/A2.

The two versions differ only in their communication options.

Figure 1-2

Design of Operator Panel OP5

Display of up to 4 lines each having a maximum length of 20 characters; the
height of the characters is 5 mm.

6 keys (F1 to F6) for calling freely programmable, generally valid standard
functions.

4 keys (F2 to F5) may alternatively be configured as soft keys. Each of these
keys can be configured with different functions for the various screens.

24 keys with permanently assigned function calls.

The OP5/A1 has an interface for connecting the PLC/computer and printer.
The OP5/A2 has two interfaces for this purpose.

OP5 versions

LCD

Function keyboard

Soft keys

System keyboard

Interfaces

Product Description

Содержание OP15













































































































































































Результаты поиска

Содержание OP15

Отзывы:

Siemens OP15, Руководство по эксплуатации оборудования, Страница: 18 / 177

Результаты поиска

Содержание OP15

Отзывы: