manualshive.com logo in svg

Siemens OP15, Руководство по эксплуатации оборудования, Страница: 79 / 177

Поделиться
Скачать
Siemens OP15 Скачать руководство пользователя страница 79

9-1

Manual OP5, OP15 
( ) J31069-D0840-U001-A2-7618

STATUS VAR and FORCE VAR Functions
with the OPs (S7/S5 Only)

With their PU functions STATUS VAR and FORCE VAR, the OPs provide
means of displaying and modifying operand values supplied by a connected
SIMATIC S5/S7 by means of standard screens. In online mode, this means
that PLC operands can be edited directly on the OP without having to con-
nect a programming unit to the PLC.

STATUS VAR can be used only to display operands.

FORCE VAR is used to display the operands and modify their variable val-
ues, and  to transfer them back to the PLC. The specified operands remain in
the static  RAM and are still valid after a warm start of the OP.

Before calling the STATUS VAR and FORCE  VAR functions, you must set
the MPI address or PPI address of the connected SIMATIC S7. If only one
PLC is connected, its address is address 2.

You call FORCE VAR by means of the standard screen ForceVAR. Following
the call, the operand list is displayed. Depending on the line length of the
display, an operand is displayed on either one or two lines.

Figure 9-1 shows the display for the SIMATIC S5 on the OP15/A (2x40).
Figure 9-2 shows the display for the SIMATIC S7 on the same device.

DB34   DW122   KM = 00010010  00110100

Value field
Format field
Numbers field
Operand field

T  1           KT = 3.4 s

*

Updating in progress

Figure 9-1 Display of PLC Operands for the SIMATIC S5 (Example: OP15/A, 2x40)

Accessing
operand values of
the PLC

Note for

SIMATIC S7

FORCE VAR

9

Содержание OP15


















































































































































































Отзывы:

Нет отзывов