Siemens OOH740-A9-Ex Скачать руководство пользователя страница 51

Страница: 51 / 72

Mounting/Installation

Detector locking device FDBZ293

Building Technologies

A6V10367521_h_en_--

Fire Safety

2015-02-02

6. Turn the point detector to the right to screw it firmly into the detector base.
7. Screw the supplied set screw into the point detector or alarm sounder until it no

longer protrudes. This step is not needed when using detector locking device

FDBZ293.

8. Fold the folded-back sealing lip over the point detector.

The sealing element is installed.

5.6 Detector locking device FDBZ293

The detector can be protected against theft with the detector locking device

FDBZ293.

Mounting of detector locking device FDBZ293

1 Detector base

4 Detector

2 Set screw with a hexagon socket

5 Allen key

3 Hole

1. Place the 'set screw with a hexagon socket' (2) in the hole (3) on the

detector (4).

2. Insert the detector (4) into the detector base (1).
3. Using the Allen key provided (5), insert the 'set screw with a hexagon

socket' (2) through the hole in the detector base (1) and tighten.

The detector can no longer be removed from the base without tools.

Содержание OOH740-A9-Ex









































































Результаты поиска

Содержание OOH740-A9-Ex

Отзывы:

Бренды по названию

Популярные бренды

Siemens OOH740-A9-Ex, Техническое руководство

Результаты поиска

Содержание OOH740-A9-Ex

Отзывы:

Бренды по названию

Популярные бренды