Configuration
52
Building Technologies
048_DMS_NK8237_ICC_MP4.40_A6V10316241_a_en.doc
Fire Safety & Security Products
06.2011
Note:
In order to select multiple units, keep the CTRL key pressed while you
make your selections.
3.
Click the
Download Configuration
button.
To ensure that download completed successfully, verify that the
Cfg
Downloaded
checkbox contains
X
. The box is automatically unchecked after
any subsequent modification to remind you that a further download is required.
After the download, the NK8237 unit stops and then reboots. The restarting phase
is monitored by the Composer tool.
Controlling and checking NK82xx status
In Composer, the
Tools
tab associated to the
NK8237
node provides you with
some control commands and screen status reports of the unit. It allows for:
Commanding a remote reset of NK8237 (that will disconnect the unit for about
one minute).
Setting date and time in the NK8237.
Reading a complete status report, which includes:
Firmware version (available on the PC and actually installed on NK8237).
Product Identifier (ID): NK8237.
Hardware configuration: 2 serial ports.
Factory Release Date (when the product burned-in)
Free
RAM
available
Kernel
Version
EEprom information: event logging and counters
Diagnostic message logging
Getting the NK8237 status (point values).
