5
Switching the fan OFF:
❑
Keep pressing the
Ü
–
button until the
fan switches off.
The displayed
{
goes out shortly
afterwards.
Intensive setting:
Maximum power is obtained at the
intensive setting. It is only required for short
intervals.
❑
Keep pressing the
Ü
+
button until a
ç
appears in the display.
❑
If the intensive setting is not cancelled by
hand, the fan will automatically switch
back to step
}
after 10 minutes.
Lighting:
❑
Briefly press the
0
+/
0
–
button to
switch the light on and off.
❑
The light can be switched on at any
time, even though the fan is switched off.
❑
Adjusting the brightness:
Hold down the
0
+
or
0
–
button until
the desired brightness is obtained.
Switching on the light automatically, e.g.
via a timer:
❑
Fan and light must be switched off.
Switching on:
Simultaneously
press the
0
–
and
0
+
buttons.
❑
After approx. 3 seconds the light
switches on to acknowledge the setting.
Switching off:
Repeat the process with the light switched
on.
❑
After approx. 3 seconds the light
switches off to acknowledge the setting.
Operating procedure
Acoustic signal:
❑
When a button is pressed, this is verified
by an acoustic signal.
Switching off the acoustic signal:
❑
Simultaneously press buttons
0
–
and
Ü
–
until a signal is emitted after
approx. 3 seconds.
Switching on the acoustic signal:
❑
Repeat the process.
Switching the fan ON
❑
Press the
Ü
+
button.
Setting the required fan speed:
❑
Press the
Ü
+
button.
The fan speed is increased by one step.
❑
Press the
Ü
–
button.
The fan speed is reduced by one step.
The most effective method of removing
vapours produced during cooking is to:
❑
Switch the ventilator ON
as soon as you begin cooking.
❑
Switch the ventilator OFF
a few minutes after you have finished
cooking.
Reduce fan speed
Fan – OFF –
Fan ON and
increase speed
Display for
fan setting
Light
