7
Activated carbon filter:
For neutralizing odours in recirculating
mode.
Saturation indicator:
ã
When the activated carbon filter reaches
saturation point, an acoustic signal is
sounded for 10 seconds after the fan has
switched off, and a
ã
appears in the
display. The activated carbon filter should
be replaced straight away.
Removing the filter:
Warning:
The halogen bulbs must be
switched off and cool.
1.
Remove the metal filters.
2.
Press in the lug at the front and remove
the activated carbon filter.
Filters and maintenance
3.
Engage the lug at the front.
4.
Insert the metal grease filters (see
"Removing and inserting the metal
grease filters").
3.
Insert the metal grease filters.
4. Cancel the
ã
in the display.
❑
Press the
Ü
–
button.
Replacing the activated carbon filter:
❑
A replacement filter can be obtained
from any authorized dealer (see optional
accessories).
❑
Use original filters only.
By doing so you will obtain maximum
performance from your extractor hood.
Disposing of the old activated carbon
filter:
❑
There are no pollutants in the activated
carbon filters. They can therefore be
disposed of as part of your normal
domestic refuse.
Inserting the filter:
Warning:
The halogen bulbs must be
switched off and cool.
1.
Remove the metal filters (see "Removing
and inserting the metal grease filters").
2.
Insert the activated carbon filter.
