Siemens HR976GM.1, Руководство пользователя и инструкции по установке

Страница: 14 / 52

en
Basic operation
14
8.5 Setting an operating mode
After you have switched on the appliance, the menu
appears on the display.
1.
To scroll through the various selection options,
swipe to the left or right on the display.
2.
To select a function, press the corresponding tile.
a
Depending on the function, possible adjustment val-
ues or other tiles are available for selection.
3. If required, press on another tile.
4.
To change the adjustment values:
‒
Swipe over the blue adjustment line or push the
adjustment line to the appropriate point.
‒
Or press ​⁠ and enter the value directly via the
number field that appears.
5. Use ​⁠ to start the operation.
6.
If the operation is ended:
‒
If required, you can select other settings and re-
start the operation.
‒
When the food is ready, use ​⁠ to switch the ap-
pliance off.
Tip: You can save your settings as "Favourites" ​⁠ and
use these again.
→ "Favourites", Page 23
8.6 Setting the type of heating and the
temperature
1.
Press "Types of heating".
2. Press the type of heating that you want to use.
3.
Set the temperature using ​⁠ or ​⁠ or via the adjust-
ment bar. Or enter the temperature directly via the
number field ​⁠.
If required, you can implement additional settings:
– → "Rapid heating", Page 15
– →
"Time-setting options", Page 15
– → "Steaming", Page 16
– → "Meat probe", Page 19
4.
Use ​⁠ to start the operation.
a
The appliance starts heating.
a
The adjustment values and how long the appliance
has already been in operation are shown on the dis-
play.
5. When the food is ready, use ​⁠ to switch the appli-
ance off.
Note: The most suitable type of heating for your food
can be found in the type of heating description.
→ "Types of heating", Page 9
Changing the type of heating
When you change the type of heating, the other set-
tings are also reset.
1. Press ​⁠.
2.
Press ​⁠.
3. Press the type of heating that you want to use.
4.
Reset the operation and use ​⁠ to start.
Changing the temperature
Once the operation has started, you can change the
temperature at any time.
1.
Press the temperature.
2. Change the temperature using ​⁠ or ​⁠ or via the ad-
justment bar. Or enter the temperature directly via
the number field ​⁠.
3.
Press "Apply".
8.7 Displaying information
In most cases, you can call up information about the
function that you have just started. The appliance auto-
matically displays certain information, e.g. to ask you to
do/confirm something or to issue a warning.
1. Press ​⁠.
a
If information is available, this is displayed for a few
seconds.
2. If there is a lot of content in the tile, scroll using ​⁠
or ​⁠.
3. If required, close the notification using ​⁠.
8.8 Sabbath-compliant use
If you want to operate your appliance so that it is Sab-
bath-compliant, use the time-setting options and
change the basic setting for the lighting and the
standby screen.
Note:
If you open the appliance door during operation,
the appliance stops heating. When you close the appli-
ance door, the appliance continues to heat again. To
operate your appliance so that it is Sabbath-compliant,
do not open the appliance door until after operation.
1. Change the "Lighting" basic setting to "Always off".
→
"Basic settings", Page 23
This will ensure that the light in the cooking com-
partment is always off while the appliance is in oper-
ation and when you open the appliance door.
2.
Change the "Standby screen" basic setting to "Off".
→ "Basic settings", Page 23
This means that the display always remains off dur-
ing operation.
3. Set the required operating mode.
→
"Setting an operating mode", Page 14
→ "Setting the type of heating and the temperature",
Page 14
4.
Set the required cooking time depending on the op-
erating mode.
→ "Setting the cooking time", Page 15
→
"Time-setting options", Page 15
5. Use "End time" to set the time at which the opera-
tion should end.
→ "Setting the end time", Page 15
→ "Time-setting options", Page 15
6.
Place the food in the cooking compartment before
the appliance starts to heat.
7.
Start the operation.
a
The display shows the start time. The appliance is in
standby mode.
a
Once the start time has been reached, the appli-
ance starts heating and the cooking time starts
counting down.
8.
When the operation has ended, remove the food
from the cooking compartment. The appliance auto-
matically switches off completely after approximately
15 to 20 minutes.
Note:
If necessary, change the basic setting for the
lighting and the standby screen again.