Mounting the HiPath Wireless Outdoor APs
OutdoorAP_Description.fm
Mounting the HiPath Wireless Outdoor AP with mounting plate
9034532, October 2009
24
HiPath Wireless Outdoor AP Installation Guide
3.5.6 Fitting the HiPath Wireless Outdoor AP to a
mounting plate
To fit an HiPath Wireless Outdoor AP to a mounting plate
:
1. Lead the cables into the housing of the HiPath Wireless Outdoor AP (Position
A in
Figure 15
). For more information, see
Chapter 4, “Connecting cables to
the HiPath Wireless Outdoor AP”
.
Figure 15
Fitting the HiPath Wireless Outdoor AP to a mounting plate
2. Fit the HiPath Wireless Outdoor AP so that the upper edge of the rear of the
housing is below the two catches of the mounting plate (Position B in
Figure
15
).
3. Push in the HiPath Wireless Outdoor AP until it engages in the notches at the
lower edge of the mounting plate (Position C in
Figure 15
).
