Siemens HiPath 4000 Скачать руководство пользователя страница 101

Страница: 101 / 135

Additional functions

Step by Step

either:

[

Select the menu item and confirm. The appointment is

deleted.

or:

[

Select the menu item and confirm. A security check

question appears.
Confirm the security check question. The appointment

reminder list is deleted.

then:

Save setting.
Press the On-hook key to end the operation.

Displaying an unconfirmed appointment

If you have failed to confirm an appointment reminder

call, a Display key is assigned the "Missed Appoint."

function. This unconfirmed appointment must also be

saved in a missed dates list.

Display an appointment. The date and time of the un-

confirmed appointment are displayed.

Displaying an unconfirmed appointment and un-
confirmed anniversaries

Any appointment reminder calls and anniversary calls

you fail to confirm are stored in a missed dates list.

Open the main menu of the handset.

[

Select the menu item and confirm.

[

Select the menu item and confirm. A list of missed/un-

confirmed appointments is displayed. The last appoint-

ment missed is always on top and the oldest is last.

[

Select an unconfirmed appointment or an unconfirmed

anniversary. The relevant information is displayed.

If applicable, delete the selected appointment.
Press the On-hook key to end the operation.

Delete Entry

Delete List

Yes

Save

Appt.

Add. Features

Missed Dates

Delete

Содержание HiPath 4000








































































































































Результаты поиска

Содержание HiPath 4000

Отзывы:

Похожие инструкции для HiPath 4000

Бренды по названию

Популярные бренды

Siemens HiPath 4000, Руководство по эксплуатации

Результаты поиска

Содержание HiPath 4000

Отзывы:

Похожие инструкции для HiPath 4000

Бренды по названию

Популярные бренды